image/svg+xml
this side of paper faces wing
this side of paper faces wing Cut along all dotted lines.
this side of paper faces wing
this side of paper faces wing Cut along all dotted lines. Here's a spare in case you need it. Remember:) Position away from all sources of magnetic error, such as servos, high current lines, ferrous materials, magnetic latches.) Orient parallel / perpendicular to all plane axesThe top nozzle connects to airspeed pitot. The bottom nozzle is not connected to anything - it's for static pressure. Just make sure the bottom nozzle is not sealed from atmospheric pressure.
this side of paper faces wing
Template for cutting out pocket for RUBY Airspeed / Magnetometerin foam wing
this side of paper faces wing Cut along all dotted lines.
this side of paper faces wing
this side of paper faces wing Cut along all dotted lines. Here's a spare in case you need it. See http://uthere.com/products/ruby/documentation/installation.html#airspeed_magnetometerThis template is also available at http://uthere.com/products/ruby/documentation/airspeed_magnetometer_cutout_template_01.pdfIf you print this yourself, be sure that the scale is correct: Place a ruler on top of one of the rulers pictured above and be sure they match. Remember:) Position away from all sources of magnetic error, such as servos, high current lines, ferrous materials, magnetic latches.) Orient parallel / perpendicular to all plane axesThe top nozzle connects to airspeed pitot. The bottom nozzle is not connected to anything - it's for static pressure. Just make sure the bottom nozzle is not sealed from atmospheric pressure.